The Process

1.    Strip or Degrease (aftermarket) Parts
2.    Fill in with evercoat Z-Grip if there any dents,dings,
       or if aftermarket
3.    DA w/ 80 Grit then 120 & 220, then 320 By Hand
4.    Shoot 3 Coats of UreFlex Primer
5.    Wetsand w/ 600 Grit
6.    Shoot 3-4 coats of base color
7.    Shoot 3 coats of Intercoat Clear (foundation for
       graphics)
8.    Layout design w/ 1/8" Blue Fineline Tape
9.    Mask and carefully cut out design w/ X-Acto
10. Airbrush Design
11. Shoot 4-5 coats of Kandy mixed in with Clear (if
       using a kandy application, if not skip to step 12.)
12. Shoot 4 coats of Topcoat Clear (w/ UV protection)
13. Wetsand and reshoot an addt'l 4 coats if opted for
       the 'double-shot'. If not skip to step 14.
14. Wetsand w/ 3000 grit
15. Buff and Polish using several different Meguiar's
       compounds
16. Stand back and admire the beautiful job!